Creality 3D Ender 3 Max 3D printer - 300x300x340 mm
See all specifications

350.00 incl. VAT

Dispatches same working day *
Details

Ender 3 Max 3D printer - 300x300x340 mm


Specifications

 

Ender 3 Max is the latest version of the popular Ender 3 series from the well-known manufacturer – Creality. It´s an affordable, large size printer that have a print volume of 300 x 300 x 340mm.

Ender 3 Max is the latest version of the popular Ender 3 series from the well-known manufacturer – Creality. It´s an affordable, large size printer that have a print volume of 300 x 300 x 340mm.

Heated build platform

The build plate can be heated to a maximum of 100°C. Thanks to this you print most common filaments such as PLA, PLA Tough, PETG and other similar materials without running the risk of warping.

Borosilicate glass plate

Thanks to the very hard glass plate you will get silky smooth prints that sticks very well. For extra security wo do recommend using, for example, PrimaFIX to make you prints stick even better.

Dual cooling fans

The dual axial cooling fan always makes sure that the filament cools down as quickly as possible. The is very important if you print much in PLA.

Powerful hot end

The Ender 3 max is equipped with a modular hot end. This ensures that your result always will be the best possible

Resume print function

Did the power suddenly or accidentally go off? No worries! The Ender 3 Max 3D Printer will resume printing if the power supply is interrupted. That’s right—you can forget about starting over because print failure is no longer an issue!

Intelligent sensor with filament breakage detector

Sometimes filament can run out, or in worst case – break. Thanks to the new intelligent sensor, the printer will stop the current print so you can change filament. Once that is don, you can continue the print as nothing had happened.

Power when you need it

The 350-w power supply makes sure that you have a perfect flow of power in every situation. You can switch between 100V – 240V.

High performance drivers

Thanks to the TMC2208 drivers that are in use in the X and Y axis, you will get a very smooth and silent running

Upgrade friendly

The manual leveling system works very well, but if you for some reason would prefer a auto level-system, the Ender3 Max in prepared for this. There is already space reserved for this option on the printer.

 

Ender-3 Max

Ender 3 Max is the latest version of the popular Ender 3 series from the well-known manufacturer – Creality. It´s an affordable, large size printer that have a print volume of 300 x 300 x 340mm.

Ender 3 Max is the latest version of the popular Ender 3 series from the well-known manufacturer – Creality. It´s an affordable, large size printer that have a print volume of 300 x 300 x 340mm.

Heated build platform

The build plate can be heated to a maximum of 100°C. Thanks to this you print most common filaments such as PLA, PLA Tough, PETG and other similar materials without running the risk of warping.

Borosilicate glass plate

Thanks to the very hard glass plate you will get silky smooth prints that sticks very well. For extra security wo do recommend using, for example, PrimaFIX to make you prints stick even better.

Dual cooling fans

The dual axial cooling fan always makes sure that the filament cools down as quickly as possible. The is very important if you print much in PLA.

Powerful hot end

The Ender 3 max is equipped with a modular hot end. This ensures that your result always will be the best possible

Resume print function

Did the power suddenly or accidentally go off? No worries! The Ender 3 Max 3D Printer will resume printing if the power supply is interrupted. That’s right—you can forget about starting over because print failure is no longer an issue!

Intelligent sensor with filament breakage detector

Sometimes filament can run out, or in worst case – break. Thanks to the new intelligent sensor, the printer will stop the current print so you can change filament. Once that is don, you can continue the print as nothing had happened.

Power when you need it

The 350-w power supply makes sure that you have a perfect flow of power in every situation. You can switch between 100V – 240V.

High performance drivers

Thanks to the TMC2208 drivers that are in use in the X and Y axis, you will get a very smooth and silent running

Upgrade friendly

The manual leveling system works very well, but if you for some reason would prefer a auto level-system, the Ender3 Max in prepared for this. There is already space reserved for this option on the printer.

 

Ender-3 Max



DELIVERY

PACKAGING

Subscribe to News

Get the news first!

Have a question?

We are ready to answer!

TALK TO US